Artesia, NM
Mon. - Fri. 7:00am - 5:00pm
Cisco Equipment Locations
Call UsMahindra 4550 4WD
Compact 4550 4WD
Features
The Mahindra 4500 series tractors are rugged and hard-working 2WDand 4WD utility tractors designed for light- to medium-duty applications. These practical, no-nonsense models are available from 40 to 65 HP and with a wide range of available implements that provides you with everything you need to get your work done.
Key Features:
- Fuel efficient, low RPM 3 & 4 cylinder engines
- Larger tires for better traction and stability
- Heavy operating weight for built in safety
- Best-in-class loader and 3-point lift capacities
- Heavy-gauge steel fenders and hood
- Hydro-static power steering
- Live 540 rpm PTO
- STANDARD rear work light
- STANDARD rubber floor mat
- STANDARD 5-year power-train warranty - Industry’s Best
Specifications
| Tractor | 4550 4WD |
| ENGINE | |
| Type | Four stroke, direct injection water-cooled, diesel |
| Cylinders | 4 |
| Engine HP (kW) @ rpm (EPA Certification) | 48 (35.8) @ 2300 (T4) |
| Compression Ratio | 18.7:1 |
| Displacement cubic inch3[cc] | 167 (2732) |
| Fuel Tank Capacity | 14.55 gallons |
| ELECTRICAL | |
| Battery Capacity | 12 volt, 96 amp hours |
| Alternator | 12 volt, 45 amps |
| CLUTCH | |
| Type | Dual |
| TRANSMISSION | |
| Type | Full constant mesh |
| Number of Gears / Speeds | 8F / 2R |
| STEERING | |
| Type | Hydrostatic Power |
| Pump Out [gallons per minute] | 5 |
| BRAKES | |
| Type | Fully enclosed dry disc |
| HYDRAULIC SYSTEM | |
| Type | Open center, full-live hydraulic with position and draft controls |
| Pump Out [gallons per minute] | 8.7 |
| 3-Point Linkage | Category 1 and 2 adjustable, with telescopic stabilizers |
| Lift Capacity [lbs.] | 3527 |
| Rear Auxilary Remote Valves | 1 spool std |
| PTO | |
| Type | Live |
| PTO RPM [engine rpm] | 540 @ 2058 |
| PTO HP [kW] | 38 (28.3) |
| OPERATING WEIGHT | |
| Total(lbs.) | 5292 |
| DIMENSIONS with Ag Tires | |
| Overall Length Inches [mm] | 127 (3227) |
| Overall Width Inches (mm) | 73.6 (1868) |
| Turning Radius Min. Feet (meters) | 93.7 (2380) |
| Overall Height inches (mm) | 10.5 (3.2) |
| TIRES Sizes and Options | |
| Ag (Front/Rear) | 9.5x16 / 12.4x28 |
| Industrial(Front/Rear) | 12.6x16.5 / 16.9x24 |
OUR SHOWROOMS
OUR EQUIPMENT
OUR DEPARTMENTS
STAY CONNECTED
Widget Title
If you are planning a trip to West Texas, specifically the Midland/Odessa area ple...
Comment (0)
September 27th, 2018 is National Crush a Can Day.
Comment (0)
September 26th 2018 is National Situational Awareness Day.
Comment (0)
September 24, 2018 is National Punctuation Day !!!!!!!!!
Comment (0)
September 17th, 2018 is National Monte Cristo Day.
Comment (0)
Copyright © 2012 - 2019 Site by EquipmentLocator.com