Clark TMX 12/15S/15/17/20/25

Double tap to zoom

 

Features

Operator Compartment

Fully Adjustable Seat

Molded for support with non-cinching, retractable seat belt

Tilt Steering Column

Adjust to suit operator and provides easier entry/exit

Cowl Mounted Hydraulic Controls

Located and sized for ease of use

Thick Molded Floor Mat

Reduces vibration and noise level to improve operator comfort

100% AC System

Fewer Parts & Minimum Wear = Less Downtime = Higher ROI

Enclosed, brushless smart lift lock out

Thermal & stall protection

One motor for both steering and hydraulics

No Brushes to Change or Commutator to Turn...Ever

Heavy Duty, High Torque Drive Motor

Produces twice the draw bar pull of some competitors

Climbs grades previously limited to IC trucks

Stall Protection

13% Increased Runtime Over DC Equivalent

Standard battery compartment accommodates a 1240 AH battery

Optional battery compartment available for a full 1550 AH battery

Proven Steer Axle

Added Strength

The standard single-tire steer axle and an optional dual-tire steer axle are made from high strength cast steel and heat treated for additional strength

Proven Drive Axle

Quiet, Dependable Operation

Incorporates spiral bevel and helical gear sets

Design has over 20 million field hours in heavy-duty application

Fully Adjustable/Programmable

Completely Customize Parameters to Operator's Preference

Acceleration rate, decelaration rate and separate FW/RV max speed

Standard Hydraulic Pump Control

Fully Programmable

Lift speed is fully proportional to lift lever position

Programmable Speeds

Tilt and auxiliary functions run at programmable fixed speeds

Traction Control

Fully Programmable

Up to 20 performance parameter settings such as acceleration, creep speed and regen braking rate can be adjusted to meet your requirements

Speed Limiting

Maximum travel speed can be programmed, forward and reverse can be set independently

Controlled Descent

Controller senses movement - no accelerator pedal input = drive motors apply counter torque allowing the truck to slowly descend an incline in a controlled manner

Ramp Start

Added torque eliminates roll back when starting on an incline

Upright & Carriage

Maximum Visibility

Nested I-channel allows space for cylinders, hoses and chains

Hydraulic Cushioning Valve

Silent staging reduces shock and vibration

Shimmable, Sealed & Canted Rollers

Carriage has 6 rollers to maximize load distribution and reduce free play

Specifications

Manufacturer’s Designation   TMX 12
Load Capacity / Rated Load @ 24” LC lbs(kg) 2500 (1250)
Height Overhead Guard in(mm) 83 (2108)
Width in(mm) 40.25 (1022)
Right Angle Stack (Add Load Length and Clearance) in(mm) 67.8 (1722)
Outside Turning Radius in(mm) 53.4 (1356)
Travel speed loaded / unloaded mph (kph) 9.3 (15.0)
Power Unit std.(optional) 36 volt (48 volt)
   
Manufacturer’s Designation   TMX 15S
Load Capacity / Rated Load @ 24” LC lbs(kg) 3000 (1500)
Height Overhead Guard in(mm) 83 (2108)
Width in(mm) 40.25 (1022)
Right Angle Stack (Add Load Length and Clearance) in(mm) 67.8 (1722)
Outside Turning Radius in(mm) 53.4 (1356)
Travel speed loaded / unloaded mph (kph) 9.3 (15.0)
Power Unit std.(optional) 36 volt (48 volt)
   
Manufacturer’s Designation   TMX 15
Load Capacity / Rated Load @ 24” LC lbs(kg) 3000 (1500)
Height Overhead Guard in(mm) 83 (2108)
Width in(mm) 40.25 (1022)
Right Angle Stack (Add Load Length and Clearance) in(mm) 74.2 (1885)
Outside Turning Radius in(mm) 59.8 (1519)
Travel speed loaded / unloaded mph (kph) 9.3 (15.0)
Power Unit std.(optional) 36 volt (48 volt)
   
Manufacturer’s Designation   TMX 17
Load Capacity / Rated Load @ 24” LC lbs(kg) 3500 (1750)
Height Overhead Guard in(mm) 83 (2108)
Width in(mm) 40.25 (1022)
Right Angle Stack (Add Load Length and Clearance) in(mm) 74.2 (1885)
Outside Turning Radius in(mm) 59.8 (1519)
Travel speed loaded / unloaded mph (kph) 9.3 (15.0)
Power Unit std.(optional) 36 volt (48 volt)
   
Manufacturer’s Designation   TMX 20
Load Capacity / Rated Load @ 24” LC lbs(kg) 4000 (1815)
Height Overhead Guard in(mm) 83 (2108)
Width in(mm) 40.25 (1022)
Right Angle Stack (Add Load Length and Clearance) in(mm) 74.2 (1885)
Outside Turning Radius in(mm) 59.8 (1519)
Travel speed loaded / unloaded mph (kph) 9.3 (15.0)
Power Unit   36 volt (48 volt)
   
Manufacturer’s Designation   TMX 25
Load Capacity / Rated Load @ 24” LC lbs(kg) 5000 (2270)
Height Overhead Guard in(mm) 83 (2108)
Width in(mm) 42.25 (1073)
Right Angle Stack (Add Load Length and Clearance) in(mm) 76.1 (1933)
Outside Turning Radius in(mm) 61.9 (1565)
Travel speed loaded / unloaded mph (kph) 7.5 (12.0)
Power Unit std.(optional) 36 volt (48 volt)