Clark GEX 20/25/30

Double tap to zoom

 

Features

Drive Motors & Axles

Fewer Parts & Minimum Wear = Less Downtime

Enclosed, brushless

Thermal and stall protection

Dual/powered reversing for tighter turns

Suitable for Wet Applications

Same motors for E & EE

Regen & Wet Disc Brakes

Three forms of Regenerative Braking

Accelerator release (Proportional to accelerator position)

Change of direction (Proportional to accelerator position)

Service brake (Foot brake)

Wet Disc Brakes

Enclosed and oil cooled for smooth, quiet operation

Built with long life lining material

Less downtime

80 Volt 100% AC System

High Performance

Rivals IC truck performance in speed, acceleration and gradeability

More Efficient System

Higher voltage = lower line loss & heating = greater efficiency

Better Suited to Rapid Charge

Only requires one receptacle via single battery connector

Increased Battery Capacity

GEX 20/25 can accommodate 54 kwh battery

GEX 30/32 can accommodate 60 kwh battery

EPA Compliant

Easily Serviced

Hinged Rear Control Cover

Supported on gas springs for easy service access from a standing position

On-Board Diagnostics

Allow servicing mechanic to check fault codes without service tool

Stable Platform

Low Center of Gravity

CLARK moved back the steer axle, dropped the battery compartment and moved all major components lower

Curve Cutback

Reduces truck travel speed in turns

Wide Stance

Provides excellent lateral stability

Powered Reversing Drive Motors

Pivot Point Between Drive Tires

Zero turn steer axle provides the tightest possible turning radius

2-Wheel Drive

Provides added traction, especially on wet or uneven surfaces

Will Not Scuff Tires

Inside wheel power reverses in tight turns preventing scuffing of steer tires like conventional 4-wheel trucks

Hall Effect Steer Sensor

Relays steer tire position to control

LCD Dash Display

Fully Adjustable/Programmable

The operator can select from 4 pre-set performance modes

Alarm Codes

Indicates the current alarm code and stores previous alarm codes for quick access

Password Protected

Certain adjustments can be password protected to allow only authorized operators to make adjustments

Specifications

Manufacturer’s Designation   GEX 20
Load Capacity / Rated Load @ 24” LC lbs(kg) 4000 (2000)
Height Overhead Guard in(mm) 84.6 (2149)
Width in(mm) 48.4 (1230)
Right Angle Stack (Add Load Length and Clearance) in(mm) 93.2 (2367)
Outside Turning Radius in(mm) 75.8 (1925)
Travel speed loaded / unloaded mph (kph) 9.7 (15.7) / 10.3 (16.7)
Power Unit   80 Volt
   
Manufacturer’s Designation   GEX 25
Load Capacity / Rated Load @ 24” LC lbs(kg) 5000 (2500)
Height Overhead Guard in(mm) 84.6 (2149)
Width in(mm) 48.4 (1230)
Right Angle Stack (Add Load Length and Clearance) in(mm) 93.2 (2367)
Outside Turning Radius in(mm) 75.8 (1925)
Travel speed loaded / unloaded mph (kph) 9.6 (15.4) / 10.3 (16.7)
Power Unit   80 Volt
   
Manufacturer’s Designation   GEX 30
Load Capacity / Rated Load @ 24” LC lbs(kg) 6000 (3000)
Height Overhead Guard in(mm) 84.6 (2149)
Width in(mm) 48.4 (1230)
Right Angle Stack (Add Load Length and Clearance) in(mm) 100.0 (2539)
Outside Turning Radius in(mm) 82.2 (2087)
Travel speed loaded / unloaded mph (kph) 9.4 (15.2) / 10.3 (16.7)
Power Unit   80 Volt