Clark GEX 16/18/20s

Features
Drive Motors & Axles
Fewer Parts & Minimum Wear = Less Downtime
Enclosed, brushless
Thermal and stall protection
Dual/powered reversing for tighter turns
Suitable for Wet Applications
Same motors for E & EE
Regen & Wet Disc Brakes
Three forms of Regenerative Braking
Accelerator release (Proportional to accelerator position)
Change of direction (Proportional to accelerator position)
Service brake (Foot brake)
Wet Disc Brakes
Enclosed and oil cooled for smooth, quiet operation
Built with long life lining material
Less downtime
36 or 48 Volt 100% AC System
h4>High Performance
Rivals IC truck performance in speed, acceleration and gradeability
Battery Capacity
GEX16 accommadates a 22.9 kwh battery
GEX18/20s accommades a 26.8 kwh battery
Easily Serviced
Rear Control Cover
The rear cover is held in place by two knobs for easy service access from a standing position
On-Board Diagnostics
Allow servicing mechanic to check fault codes without service tool
Upright & Carriage
Maximum Visibility
Nested I-channel allows space for cylinders, hoses and chains
Hydraulic Cushioning Valve
Silent staging reduces shock and vibration
Shimmable, Sealed & Canted Rollers
Carriage has 6 rollers to maximize load distribution and reduce free play
Stable Platform
Low Center of Gravity
CLARK moved back the steer axle, dropped the battery compartment and moved all major components lower
Curve Cutback
Reduces truck travel speed in turns
Wide Stance
Provides excellent lateral stability
Powered Reversing Drive Motors
Pivot Point Between Drive Tires
Zero turn steer axle provides the tightest possible turning radius
2-Wheel Drive
Provides added traction, especially on wet or uneven surfaces
Will Not Scuff Tires
Inside wheel power reverses in tight turns preventing scuffing of steer tires like conventional 4-wheel trucks
Hall Effect Steer Sensor
Relays steer tire position to control
Dash Display
Fully Adjustable/Programmable
The operator can select from 4 pre-set performance modes
Alarm Codes
Indicates the current alarm code and stores previous alarm codes for quick access
Password Protected
Certain adjustments can be password protected to allow only authorized operators to make adjustments
Specifications
Manufacturer’s Designation | GEX 16 | |
Load Capacity / Rated Load @ 24” LC | lbs(kg) | 3200 (1600) |
Height Overhead Guard | in(mm) | 80.9 (2055) |
Width | in(mm) | 43.5 (1105) |
Right Angle Stack (Add Load Length and Clearance) | in(mm) | 77.8 (1976) |
Outside Turning Radius | in(mm) | 63.8 (1620) |
Travel speed loaded / unloaded | mph (kph) | 9.3 (15) / 9.9 (16) |
Power Unit | 36/48 Volt | |
Manufacturer’s Designation | GEX 18 | |
Load Capacity / Rated Load @ 24” LC | lbs(kg) | 3600 (1800) |
Height Overhead Guard | in(mm) | 80.9 (2055) |
Width | in(mm) | 43.5 (1105) |
Right Angle Stack (Add Load Length and Clearance) | in(mm) | 82.0 (2084) |
Outside Turning Radius | in(mm) | 68.0 (1728) |
Travel speed loaded / unloaded | mph (kph) | 9.3 (15) / 9.9 (16) |
Power Unit | 36/48 Volt | |
Manufacturer’s Designation | GEX 20s | |
Load Capacity / Rated Load @ 24” LC | lbs(kg) | 4000 (2000) |
Height Overhead Guard | in(mm) | 81.1 (2059) |
Width | in(mm) | 45.1 (1146) |
Right Angle Stack (Add Load Length and Clearance) | in(mm) | 82.2 (2089) |
Outside Turning Radius | in(mm) | 68.0 (1728) |
Travel speed loaded / unloaded | mph (kph) | 9.3 (15) / 9.9 (16) |
Power Unit | 36/48 Volt |
Copyright © 2012 - 2019 Site by EquipmentLocator.com