Clark ECX 20/25/30/32

Double tap to zoom

 

Features

Operator Compartment

Fully Adjustable Seat

Molded for support with non-cinching, retractable seat belt

Tilt Steering Column

Adjust to suit operator and provides easier entry/exit

Cowl Mounted Hydraulic Controls

Located and sized for ease of use

Thick Molded Floor Mat

Reduces vibration and noise level to improve operator comfort

100% AC System

Fewer Parts & Minimum Wear = Less Downtime = Higher ROI

Enclosed, brushless smart lift lock out

Thermal & stall protection

One motor for both steering and hydraulics

No Brushes to Change or Commutator to Turn...Ever

Heavy Duty, High Torque Drive Motor

Produces twice the draw bar pull of some competitors

Climbs grades previously limited to IC trucks

Stall Protection

Three Forms of Regenerative Braking

Returns energy into the battery

Rugged Cast Steer Axle

Maximum Protection

Dual action steer cylinder and fittings are protected while allowing easy access to the components

Proven Drive Axle

One-Piece Housing

The CLARK ED30 reduces the possibility of leaks

Smooth, Quiet Operation

Utilizes durable helical gears

Fully Adjustable/Programmable

Completely Customize Parameters to Operator's Preference

Acceleration rate, decelaration rate and separate FW/RV max speed

Dash Display

Parking Brake Reminder

Sounds alarm if operator does not set parking brake

Back Lit LCD

Auto on with key switch and provides excellent visibility in direct sunlight

Battery State of Charge and Travel Speed Digital Gauge

10-segments used to display remaining charge and programmed speed

Traction Control

Fully Programmable

Up to 20 performance parameter settings such as acceleration, creep speed and regen braking rate can be adjusted to meet your requirements

Speed Limiting

Maximum travel speed can be programmed to your requirements and if necessary, forward and reverse can be set independently

Controlled Descent

When the controller senses movement but no accelerator pedal input, it signals the drive motors to apply counter torque allowing the truck to slowly descend an incline in a controlled manner

Ramp Start

Added torque eliminates roll back when starting on an incline

Upright & Carriage

Maximum Visibility

Nested I-channel allows space for cylinders, hoses and chains

Hydraulic Cushioning Valve

Silent staging reduces shock and vibration

Shimmable, Sealed & Canted Rollers

Carriage has 6 rollers to maximize load distribution and reduce free play

Specifications

Manufacturer’s Designation   ECX 20
Load Capacity / Rated Load @ 24” LC lbs(kg) 4000 (2000)
Height Overhead Guard in(mm) 88 (2235)
Width in(mm) 41.9 (1063)
Right Angle Stack (Add Load Length and Clearance) in(mm) 86.8 (2204)
Outside Turning Radius in(mm) 70.2 (1783)
Travel speed unloaded mph (kph) 9.2 (14.8) / 11.3 (18.2)
Power Unit   36 volt / 48 volt
   
Manufacturer’s Designation   ECX 25
Load Capacity / Rated Load @ 24” LC lbs(kg) 5000 (2500)
Height Overhead Guard in(mm) 88 (2235)
Width in(mm) 43.9 (1114)
Right Angle Stack (Add Load Length and Clearance) in(mm) 89.7 (2279)
Outside Turning Radius in(mm) 72.6 (1845)
Travel speed unloaded mph (kph) 9.1 (14.6) / 11.0 (17.7)
Power Unit   36 volt / 48 volt
   
Manufacturer’s Designation   ECX 30
Load Capacity / Rated Load @ 24” LC lbs(kg) 6000 (3000)
Height Overhead Guard in(mm) 88 (2235)
Width in(mm) 43.9 (1114)
Right Angle Stack (Add Load Length and Clearance) in(mm) 91.3 (2319)
Outside Turning Radius in(mm) 73.9 (1877)
Travel speed unloaded mph (kph) 8.7 (14.0) / 10.8 (17.4)
Power Unit   36 volt / 48 volt
   
Manufacturer’s Designation   ECX 32
Load Capacity / Rated Load @ 24” LC lbs(kg) 6500 (3000)
Height Overhead Guard in(mm) 88 (2235)
Width in(mm) 45.4 (1154)
Right Angle Stack (Add Load Length and Clearance) in(mm) 96.2 (2444)
Outside Turning Radius in(mm) 78.3 (1989)
Travel speed unloaded mph (kph) 8.0 (12.9) / 10.4 (16.7)
Power Unit   36 volt / 48 volt